Core Drill
Automatic Feeding System
Options for Core Drill
Hand Cutter
Wall Cutter
Plunge Cutter
Wire Saw
Options for Wire Saw
Hydraulic Unit

Contact

Mail

 

ProductETechnical Information„ „Wall Cutter „CDW-40AEx

Electric Wall Cutter
CDW-40AEx
 ¡Max. Output 6,400W Heavy Duty Electric Wall Cutter
 ¡Water seal can be replaced without disassembling gearbox.
 ¡Motor and base can be separated.
 ¡Wall Cutter can be setup at any position of Track Rail.
 ¡Feeding part can be set up at both right and left side.
 ¡Adopted One-Touch Plug System which is superior to the strength and the waterproofing for the connection of the operation cord.
 ¡Strength up with increasing thickness of Track Rail.
 ¡Front of Blade Cover is separative.
 ¡40h blade can be used by step cut.
 ¡Automatic feeding is possible.
 ¡The machine is not certificated CE.
 ¡RoHS regulation is not applied.
 ¡UL standard is not obtained.
 
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

Introduction ‚†‚‚’@‚v‚‚Œ‚Œ Cutter CDW-40AEx

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Specifications
 Model Name
 CDW-40AEx
 Power Supply  Single-phase 230V 50/60H‚š
 Rated Current
 15.8A
 Max. Output
 6,400W
 No-load Speed  340/840min-1
 Standard Blade Dia.  30h (762mm)
 Max. Blade Dia.  40h (1,016mm) by Step Cut Method
 Blade Hole Dia.  35mm
 Max. Depth of Cut
 30h (762mm)
 301mm
 40h (1,016mm)
 428mm
 Size W~L~H  484~460~753mm
 Weight (Excluding Cord)
 36.5kg
 Standard Accessories
 Tool Box@(1)
 Single-ended Wrench 24mm (1)
 Rachet Wrench 14~17mm (1)
 Hex. Bar Wrench 5mm 6mm (1)
 Dust Blower (1)
 Hex. Hd. Bolt W3/8~38mm (8)
 W3/8~50mm (8)
 Square Washer W3/8~50~30~t6 (8)
 Flat Washer W3/8 (8)
 Speeder 204 (1)
 Extension Bar 307 (1)
 Universal Joint 208 (1)
 Socket 3D-13 (1)
 Instruction Manual
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -



¦Wall Cutter CDW-40AEx
¦Track Rail 1200L A
¦Blade Cover 30A
¦Control Box BE-31A (230V)


- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

 Blade Cover (Option)
 Model  Blade Cover 30A
 Blade Cover 40A
 Blade Cover 48A
 Max. Blade Dia.
 30h
 40h
 48h
 Weight  9.7kg
 13.5kg
 18.0kg
 Image
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Track Rail (Option)
 Model  Track Rail 600L A
 Track Rail 1200L A
 Track Rail 1800L A
 Length
 600mm
 1,200mm
 1,800mm
 Weight  6.3kg
 12.5kg
 18.8kg
 Image
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Control Box (Option)
 ¡Control Box for CDW-40AEx and DSX-10Ax.
 ¡Soft starting circuit is included.
 ¡Cutting load current is shown by LED bar chart meter.
 ¡Auto-Stop function can be used. (in case DSX-10A is used)
 ¡Manual control is also possible.
 Model  BE-31A (230V)
 Power Supply
 Single-phase 230V 50/60H‚š
 Max. Power Consumption  150W
 Rated Current Control Range  15.8A
 Size W~L~H  265~200~179mm
 Weight  5.0kg
 Standard Accessories  7 core cord 10m (1)
 Photograph
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Diamond Blade (Option)
 Model  Blade Hole Dia.


 Blade for CDW-40AEx
 (CHW-50A)
 ƒÓ35
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Others (Option)
 Application  Model
 Water Supply  Water Supply Tank T-13A
 Double Line Cut Attachment  CDW Double Line Cut Flange set
 24A Full Cover 24A for D.L.Cut
 26A@Full Cover 26A for D.L.Cut
 31A@Full Cover 31A for D.L.Cut
 40A@Full Cover 40A for D.L.Cut
 24A Half Cover 24A for D.L.Cut
 26A@Half Cover 26A for D.L.Cut
 31A@Half Cover 31A for D.L.Cut
 40A@Half Cover 40A for D.L.Cut@
 Corner Edge Cut  Corner Edge Blade Receiver

 
@
@