|
ProductETechnical Information
Wall Cutter CHW-50`
|
HYDRAULIC WALL CUTTER |
CHW-50A |
|
|
‘@3 types of Hydraulic Motor Assy are lined up.
‘ Hydraulic Motor and base can be separated.
‘ Wall Cutter can be setup at any position of Track Rail.
‘ Feeding part can be set up at both right and left side.
‘ Adopted One-Touch Plug System which is superior to the strength and the
waterproofing for the connection of the operation cord.
‘@Strength up with increasing thickness of Track Rail.
‘ Front of Blade Cover is possible to separate.
‘ 48h blade can be used with step cut.
‘ The machine is not certificated CE.
‘ RoHS regulation is not applied.
‘ UL standard is not obtained. |
|
- - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - |
¦ Wall CutterF CHW-50A
¦ Hydraulic Motor AssyF 2060-12A
¦ Track Rail 1200LA
¦ Blade Cover 30A
¦ Control BoxF Automatic feeding System BE-31A
|
|
|
- - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
|
Flange Water Supply |
Hydraulic Motor |
- - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
|
Wall Cutter Specification
|
Hydraulic Wall Cutter Model
|
CHW-50A
|
Standard Blade Dia.
|
30h(762mm)
|
Blade Hole Dia.
|
35mm
|
Applicable Control Box |
BE-31A (Manual operation is also possible) |
Hydraulic Motor Assy Model
(Option) |
2060-12A |
HB05-16A |
HB08-24A |
Pressure |
21MPa |
Torque |
19daN-m |
24daN-m |
34daN-m |
Max. Flow |
54Emin |
79Emin |
95Emin |
Max Revolution.(allowance)
(at joined with E-1114A 50/60Hz) |
(at joined with E-1812A 50/60Hz) |
|
850min -1
659/792min-1 |
739/850min-1 |
|
898min-1
474/569min-1 |
531/635min-1 |
|
746min-1
332/399min-1 |
372/445min-1 |
|
Max.Blade Dia. (Please take the Step Cut Method before setting)
|
30h(762mm)
|
40h(1,016mm) |
48h(1,220mm) |
Max.Depth of Cut |
291mm |
418mm |
520mm |
Size
|
Width(W) |
484mm |
Length(L)
|
410mm
|
434mm |
440mm |
Height(H)
|
741mm |
Weight
|
40kg
|
41kg |
41kg |
- - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
|
Hydraulic Wall Cutter |
Model |
CHW-50A |
|
Weight |
28kg
|
Standard Accessories |
Tool Box (1)
Single-ended Wrench 24mm (1)
Ratchet Wrench14~17mm (1)
Hex. Bar Wrench 5mm 6mm (1)
Dust Blower (1)
Hex.Hd. Bolt W3/8~38mm (8)
Hex.Hd. Bolt W3/8~50mm (8)
Square Washer W3/8~50~30~t6 (8)
Flat WasherW3/8 (8)
Speeder 204 (1)
Extension Bar 307 (1)
Universal Joint 208 (1)
Socket 3D-13 (1) |
- - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
|
Hydraulic Motor Assy |
Model |
2060-12A |
HB05-16A
|
HB08-24A
|
Applicable Blade Dia. |
30h(762mm)
|
40h(1,016mm)
|
48g(1,220mm)
|
Weight |
12.0kg |
13.0kg
|
13.3kg
|
Standard Accessories |
O-ring
Hex. Bar Wrench 10mm
Bolt for Fixing. |
|
- - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
|
Standard Blade Cover (Option) |
Model |
Blade Cover 30A |
Blade Cover 40A
|
Blade Cover 48A
|
Max.Blade Dia. |
30h
|
40h
|
48h
|
Weight |
9.7kg |
13.5kg
|
18.0kg
|
|
- - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
|
Track Rail (Option) |
Model |
Track Rail 600LA |
Track Rail 1200LA
|
Track Rail 1800LA
|
Length |
600mm
|
1,200mm
|
1,800mm
|
Weight |
6.3kg |
12.5kg
|
18.8kg
|
|
- - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
|
Control Box (Option) |
‘ Control Box for CDW-40AEx and DSX-10Ax
‘ Soft Starting circuit is included.
‘ Cutting load current is shown by bar chart meter
‘ Auto-Stop function can be used(in case crw-PO` is usedj
‘ Manual control is also possible. |
Model |
BE-31A |
Power supply |
Single-phase 230V 50/60Hz
|
Max. Power Control Range |
150W |
Rated Current Control Range |
15.8A |
Size W~L~H |
265~200~179mm |
Weight |
5.0kg |
Standard Accessories |
7 core cord 10m |
|
- - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
|
Diamond Blade |
Model |
Hole Dia |
|
Blade for CDW-40AE(CHW-50A) |
Σ35
|
‘@We have various Diamond Blade, please contact our sales engineer.
|
- - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
|
Applicable Hydraulic Unit |
Model. |
Photo |
E-1114A |
|
E-2002Ax |
|
- - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
|
Others (Option) |
Application |
Model |
Water Supply |
Water Supply Tank T-13A |
Double Line Cut |
CDW Double Line Cut Flange set |
Full Cover 24A for D.L.Cut |
Full Cover 26A for D.L.CutA |
Full Cover 31A for D.L.Cut |
Full Cover 40A for D.L.Cut |
Half Cover 24A for D.L.Cut |
Half Cover 26A for D.L.Cut |
Half Cover 31A for D.L.Cut |
Half Cover 40A for D.L.Cut@ |
Corner Edge Cut |
Corner Edge Blade Receiver |
|
|
|
@ |