Core Drill
Automatic Feeding System
Options for Core Drill
Hand Cutter
Wall Cutter
Plunge Cutter
Wire Saw
Options for Wire Saw
Hydraulic Unit

Contact

Mail

 

Product・Technical Information＞ ＞Hydraulic Unit＞E-1114Ax
Compact Hydraulic Unit E-2002Ax

■ 20kW High power water-cooled motor integrated
■ Light weight and compact size with using aluminum frame
■ Oil cooler with high efficient heat exchange enables long time continuous use
■ Water drain equipped for preventing freeze damage of water-cooled motor in the cold season
■ Magnet equipped in hydraulic tank drain bolt in order to clear the iron powder mixed in hydraulic oil.
■ 5/8" hydraulic hose 20m (Low pressure drop type) is standard accessory
■ The machine is not certificated CE marking
■ RoHS regulation is not applied
■ UL standard is not obtained

Applications
■ Compact Hydraulic Wire Saw DSM series
■ Hydraulic Core Drill SPU series
■ Hydraulic Wall Cutter CHW series
■ Hydraulic Plunge Cutter PCH-48V




Specifications
Model E-2002Ax
Power supply 3-phase 400V 50/60Hz
Commercial power source over 50A
Electric Motor 3-phase induction motor
Water-cooled 20kw 2P
Hydraulic Pump Type Variable capacity piston pump
Rated pressure 21MPa
The range of adjusting discharge amount 50Hz 23.5～47.9 litter/min
60Hz 28.3～57.6 litter/min
Coupling Out NITTO KOHKI Flat Face Cupla 1/2” Plug
In NITTO KOHKI Flat Face Cupla 1/2” Socket
Oil Tank Capacity 20ℓ
Hydraulic Actuation Oil Mineral Abrasion Resistance Actuation Oil ISO-VG46
Size W×L×H 680W×943L×902～1,242Hmm
Weight (Excluded Code) 212kg
Standard Accessories Hydraulic Hose 5/8” Assy.
FF Plug and Socket 20m (2)
Single-ended Spanner 13mm (1)
Instruction Manual (1)