Core Drill
Automatic Feeding System
Options for Core Drill
Hand Cutter
Wall Cutter
Plunge Cutter
Wire Saw
Options for Wire Saw
Hydraulic Unit

Contact

Mail

 

ProductETechnical Information„ „Core Drill „‚r‚o‚e-‚P‚W‚P‚t‚ˆ‚Q‚‰

 Drill Head 
‚r‚o‚e-‚P‚W‚P‚t‚ˆ‚Q‚‰
( 2-speed )

¡The machine is CE certificated.
¡RoHS regulation is applied.
 ¡Max. Output is ‚Q,‚P‚O‚OW.
 ¡Swiveling water valve. Water Valve can be swiveled 360 degrees.
 ¡Clutch is easily adjustable from outside the motor. Adjustable on job site with minimal tools required.
 ¡High performance circuit protector.
 ¡49mm roller slide type Drill Carriage. Light cutting and high accuracy drilling are possible.
 ¡‚nne-touch handle. You can change both of left and right of the feeding handle. The one-touch handle includes a spring center device.
 ¡This machine can be installed Automatic Feeding System EHAC by an easy remodeling.
 ¡49mm Pole Base.

 

 
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
 Specification
 Model of Drill Head  SPF-181Uh2i
 Power Supply  Single-phase 230V ` 50H‚š
 Rated Current  7.3A
 Max. Output  2,100W
 No-load Speed  700/1,250min-1 
 Max. Bit Dia.  180mm (7")
 Installing Screw  Outside  Unified Screw (1-1/4h-7UNC)
 Inside  H Screw (G 1/2) (BSP 1/2)
 Autmatic Feeding System  Remodeling is possible
 Size W~L~H  212~327~420mm
 Weight iExcluding cordj  10.2kg
 Standard Accessories  Hose Band 00 (1)
 Hose 12~250 (1)
 Hex. Bar Wrench 4mm (1)
 Instruction Manual
 Plug  C type
 Model of Pole Base  SB-491-810 (SB-491 series)
 Stroke  Without water collector  505mm
 With water collector  479mm
 Length of Core Bit which can install
 (Unified Screw)
 546mm
 Size  Base Size W~L  177~217mm
 Height  810mm
 Water Collector type  Height 94mm
 Weight  7.5kg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

 (reference)
¦Drill Head F SPF-181A2
¦Pole Base F SB-491-810
¦Water Collector F MS-8
¦Core Bit F 180mm

 
¦Drill Head F SPF-181Uh2i
¦Pole Base iOptionj F SB-491-1000
¦Water Collector iOptionj F MS-8
¦Core Bit iOptionjF 180mm
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
 49mm Pole Base iOption j
 Model  SB-491-810  SB-491-1000
 Stroke  Without water collector  505mm  695mm
 With water collector  479mm  669mm
 Length of Core Bit which can install
 (Unified Screw)
 546mm  736mm
 Size  Base size W~L  177~217mm
 Height  810mm  1,000mm
 Water Collector type  Height 94mm
 Weight  7.5kg  8.5kg
 Image

 

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Water Collector iOptionj
Model Size Material Image
ID OD Height
 MS-2 ƒÓ58
ƒÓ70
ƒÓ82
ƒÓ125 94mm Rubber product
 MS-3 ƒÓ83
ƒÓ95
ƒÓ115
ƒÓ165 94mm Rubber product
 MS-4 ƒÓ130 ƒÓ210 94mm Rubber product
 MS-6 ƒÓ180 ƒÓ250 94mm Rubber product
 MS-8 ƒÓ230 ƒÓ310 94mm Rubber product
 ¦ The cutout inside diameter can be enlarged with a knife according to the bit size.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Option
 Use@Application  Model
 Angle Adjustable Base  Angle Adjustable Base AB-491-850
 Angle Adjustable Base AB-491-1040
 Automatic Feeding System  Automatic Feeding System EHAC-130Ai
 EHAC Stopper for 49mm
 EHAC Right Handle
 Supply and drain water  Water Tank T-13A
 Water Collector Fitting MK-49
 Tool  Clutch Adjusting Pin
 Spanner Wrench 36mm for torque wrench
 Torque Wrench 900FK
 
@
@