[CONSEC]発研製品

Product・Technical Information＞＞Core Drill ＞ＳＰＮ-２０１Ａｘ

Drill Head

ＳＰＮ-２０１Ａｘ

( 1-speed )

■Max. Output is ２,４００W.
■Double insulation construction.
■Swiveling water valve. Water Valve can be swiveled 360 degrees.
■Clutch is easily adjustable from outside the motor. Adjustable on job site with minimal tools required.
■High performance circuit protector.
■49mm roller slide type Drill Carriage. Light cutting and high accuracy drilling are possible.
■Ｏne-touch handle You can change both of left and right of the feeding handle. The one-touch handle includes a spring center device.
■This machine can be installed Automatic Feeding System EHAC by an easy remodeling.
■49mm Pole Base.
■The machine is not CE Certificated.
■RoHS regulation is not applied.
■UL standard is not obtained.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Specification
Model of Drill Head		SPN-201Ax
Power Supply		Single-phase 230V ～ 50/60Hｚ
Rated Current		8.7A
Max. Output		2,400W
No-load Speed		710min^-1
Max. Bit Dia.		205mm (8")
Installing Screw		A Rod Screw
Plug		O type
Size W×L×H		247×328×415mm
Weight （Excluding cord）		11.0kg
Standard Accessories		Single-ended Wrench 36mm (2) Ratchet Wrench 17×21mm (1) Hex. Bar Wrench 4mm (1) Instruction Manual
Model of Pole Base		SB-491-810 (SB-491 series)
Stroke	Without water collector	505mm
	With water collector	479mm
Length of Core Bit which can install		544mm
Size	Base Size W×L	177×217mm
	Height	810mm
Water Collector type		Height 94mm
Weight		7.5kg

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

※ Drill Head ： SPN-201Ax
※ Pole Base （Option）： SB-491-810
※ Water Collector （Option）： MS-8
※ Core Bit （Option）： 8”

※ Drill Head ： SPN-201Ax
※ Pole Base （Option）： SB-491-1000
※ Water Collector （Option）： MS-8
※ Core Bit （Option）： 8”

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

49mm Pole Base （Option ）
Model		SB-491-810	SB-491-1000
Stroke	Without water collector	505mm	695mm
	With water collector	479mm	669mm
Length of Core Bit which can install		539mm	734mm
Size	Base size W×L	177×217mm
	Height	810mm	1,000mm
Water Collector type		Height 94mm
Weight		7.5kg	8.5kg
Image

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Water Collector （Option）
Model	Size			Material	Image
Model	ID	OD	Height	Material	Image
MS-2	φ58 φ70 φ82	φ125	94mm	Rubber product
MS-3	φ83 φ95 φ115	φ165	94mm	Rubber product
MS-4	φ130	φ210	94mm	Rubber product
MS-6	φ180	φ250	94mm	Rubber product
MS-8	φ230	φ310	94mm	Rubber product
※ The cutout inside diameter can be enlarged with a knife according to the bit size.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Option
Use　Application	Model
Angle Adjustable Base	Angle Adjustable Base AB-491-850
Angle Adjustable Base	Angle Adjustable Base AB-491-1040
Automatic Feeding System	Automatic Feeding System EHAC-130Ai
	EHAC Stopper for 49mm
	EHAC Right Handle
Supply and drain water	Water Tank T-13A
Supply and drain water	Water Collector Fitting MK-49
Tool	Clutch Adjusting Pin
	Spanner Wrench 36mm for torque wrench
	Torque Wrench 900FK