Core Drill
Automatic Feeding System
Options for Core Drill
Hand Cutter
Wall Cutter
Plunge Cutter
Wire Saw
Options for Wire Saw
Hydraulic Unit

Contact

Mail

 

Product・Technical Information＞ ＞Core Drill ＞ＳＰＺ-２５０Ａ２ｘ
 Drill Head 
ＳＰＺ-２５０Ａ２ｘ
 ( 2-speed )

 ■Max. Output is ２,４００W.
 ■Two speed of gear motor.
 ■Double insulation construction.
 ■Swiveling water valve.　Water Valve can be swiveled 360 degrees.
 ■Clutch is easily adjustable from outside the motor.　Adjustable on job site with minimal tools required.
 ■High performance circuit protector.
 ■49mm roller slide type Drill Carriage.　Light cutting and high accuracy drilling are possible.
 ■Ｏne-touch handle.
 You can change both of left and right of the feeding handle.　The one-touch handle includes a spring center device.
 ■This machine can be installed Automatic Feeding System　EHAC by an easy remodeling.
 ■49mm Pole Base.
 ■The machine is not CE Certificated.
 ■RoHS regulation is not applied.
 ■UL standard is not obtained.

 
 
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
 Specification
 Model of Drill Head  SPZ-250A2x
 Power Supply  Single-phase 230V ～ 50/60Hｚ
 Rated Current  8.7A
 Max. Output  2,400W
 No-load Speed  490/1,150min-1 
 Max. Bit Dia.  254mm (10")
 Installing Screw  Ａ Rod Screw
 Plug  O type
 Size W×L×H  255×353×447mm
 Weight （Excluding cord）  12.3kg
 Standard Accessories  Single-ended Wrench 36mm (2)
 Ratchet Wrench 17×21mm (1)
 Hex. Bar Wrench 4mm (1)
 Instruction Manual
 Model of Pole Base  SB-491-810 (SB-491 series)
 Stroke  Without water collector  505mm
 With water collector  474mm
 With MK-49  427mm
 Length of Core Bit which can install  539mm
 Size  Base Size W×L  177×217mm
 Height  810mm
 Water Collector type  Height 94mm
 Weight  7.5kg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

 
※ Drill Head ： SPZ-250A2x
※ Pole Base （Option） ： SB-491-810
※ Water Collector （Option） ： MS-8
※ Core Bit （Option） ： 8”

 
※ Drill Head ： SPZ-250A2x
※ Pole Base （Option） ： SB-491-1000
※ Water Collector （Option） ： MS-10
※ Water Collector Fitting （Option） ： MK-49
※ Core Bit （Option） ：　10”
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
 49mm Pole Base （Option ）
 Model  SB-491-810  SB-491-1000
 Stroke  Without water collector  505mm  695mm
 With water collector  474mm  664mm
 With MK-49  427mm  617mm
 Length of Core Bit which can install  539mm  729mm
 Size  Base size W×L  177×217mm
 Height  810mm  1,000mm
 Water Collector type  Height 94mm
 Weight  7.5kg  8.5kg
 Image

 
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Water Collector Fitting （Option ）
 Model  MK-49
 Water Collector  MS-2 ～ MS-10
 Image

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Water Collector （Option）
Model Size Material Image
ID OD Height
 MS-2 φ58
φ70
φ82		 φ125 94mm Rubber product
 MS-3 φ83
φ95
φ115		 φ165 94mm Rubber product
 MS-4 φ130 φ210 94mm Rubber product
 MS-6 φ180 φ250 94mm Rubber product
 MS-8 φ230 φ310 94mm Rubber product
 MS-10 φ260 φ310 109mm Aluminum product
 ※ The cutout inside diameter can be enlarged with a knife according to the bit size.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Option
 Use　Application  Model
 Angle Adjustable Base  Angle Adjustable Base AB-491-850
 Angle Adjustable Base AB-491-1040
 Automatic Feeding System  Automatic Feeding System EHAC-130Ai
 EHAC Stopper for 49mm
 EHAC Right Handle
 Supply and drain water  Water Tank T-13A
 Water Collector Fitting MK-49
 Tool  Clutch Adjusting Pin
 Spanner Wrench 36mm for torque wrench
 Torque Wrench 900FK